$1,044.55 Excl GST
($1,149.01 Incl GST)
620 W, Planer, Planing Width: 82 mm, Depth: 2.6 mm, Notch Depth: 9 mm, 17,000 rpm
$323.10 Excl GST
($355.41 Incl GST)
620 W, Planer, Planing Width: 82 mm, Depth: 2.6 mm, Notch Depth: 9 mm, 17,000 rpm
$323.10 Excl GST
($355.41 Incl GST)
$1,044.55 Excl GST
($1,149.01 Incl GST)
Please take the time to read these terms and conditions. By using Our Website and the Services and information offered on Our Website, you are agreeing to these terms and conditions.
If you purchase products through our Website, there will be additional terms and conditions relating to the purchase. Please make sure you agree with these terms and conditions, which you will be directed to read prior to making your purchase.
Definitions
Services means workshop compliance and welding equipment.
the Website means the website www.weldconnect.com.au
We / Us etc means Weldconnect Group Pty LTD and any subsidiaries, affiliates, employees, officers, agents or assigns.
Accuracy of content
We have taken proper care and precautions to ensure that the information we provide on this Website is accurate. However, we cannot guarantee, nor do we accept any legal liability arising from or connected to, the accuracy, reliability, currency or completeness of anything contained on this Website or on any linked site.
The information contained on this Website should not take the place of professional advice.
Use
The Website is made available for your use on your acceptance and compliance with these terms and conditions. By using this Website, you are agreeing to these terms and conditions.
You agree that you will use this website in accordance with all applicable local, state, national and international laws, rules and regulations.
You agree that you will not use, nor will you allow or authorise any third party to use, the Website for any purpose that is unlawful, defamatory, harassing, abusive, fraudulent or obscene way or in any other inappropriate way or in a way which conflicts with the Website or the Services.
If you contribute to our forum (if any) or make any public comments on this Website which are, in our opinion, unlawful, defamatory, harassing, abusive, fraudulent or obscene or in any other way inappropriate or which conflict with the Website or the Services offered, then we may at our discretion, refuse to publish such comments and/or remove them from the Website.
We reserve the right to refuse or terminate service to anyone at any time without notice or reason.
Passwords and logins
You are responsible for maintaining the confidentiality of your passwords and login details and for all activities carried out under your password and login.
Indemnification for loss or damage
You agree to indemnify Us and hold Us harmless from and against any and all liabilities or expenses arising from or in any way related to your use of this Website or the Services or information offered on this Website, including any liability or expense arising from all claims, losses, damages (actual and consequential), suits, judgments, litigation costs and solicitors fees of every kind and nature incurred by you or any third parties through you.
Intellectual property and copyrights
We hold the copyright to the content of this Website, including all uploaded files, layout design, data, graphics, articles, file content, codes, news, tutorials, videos, reviews, forum posts and databases contained on the Website or in connection with the Services. You must not use or replicate our copyright material other than as permitted by law. Specifically, you must not use or replicate our copyright material for commercial purposes unless expressly agreed to by Us, in which case we may require you to sign a Licence Agreement.
If you wish to use content, images or other of our intellectual property, you should submit your request to us at the following email address:
support@wedconnect.com.au
Trademarks
The trademarks and logos contained on this Website are trademarks Weldconnect Group Pty LTD. Use of these trademarks is strictly prohibited except with Our express, written consent.
Links to external websites
This Website may contain links that direct you outside of this Website. These links are provided for your convenience and are not an express or implied indication that we endorse or approve of the linked Website, it’s contents or any associated website, product or service. We accept no liability for loss or damage arising out of or in connection to your use of these sites.
You may link to our articles or home page. However, you should not provide a link which suggests any association, approval or endorsement on our part in respect to your website, unless we have expressly agreed in writing. We may withdraw our consent to you linking to our site at any time by notice to you.
Limitation of Liability
We take no responsibility for the accuracy of any of the content or statements contained on this Website or in relation to our Services. Statements made are by way of general comment only and you should satisfy yourself as to their accuracy. Further, all of our Services are provided without a warranty with the exception of any warranties provided by law. We are not liable for any damages whatsoever, incurred as a result of or relating to the use of the Website or our Services.
Information Collection
Use of information you have provided us with, or that we have collected and retained relating to your use of the Website and/or our Services, is governed by our Privacy Policy. By using this Website and the Services associated with this Website, you are agreeing to the Privacy Policy. To view our Privacy Policy and read more about why we collect personal information from you and how we use that information, click here.
Confidentiality
All personal information you give us will be dealt with in a confidential manner in accordance with our Privacy Policy. However, due to circumstances outside of our control, we cannot guarantee that all aspects of your use of this Website will be confidential due to the potential ability of third parties to intercept and access such information.
Governing Law
These terms and conditions are governed by and construed in accordance with the laws of QLD Australia. Any disputes concerning this website are to be resolved by the courts having jurisdiction in QLD.
We retain the right to bring proceedings against you for breach of these Terms and Conditions, in your country of residence or any other appropriate country or jurisdiction.
Weldconnect Group PTY LTD
ABN 93 165 053 494
This privacy policy sets out how [@CONFIG:COMPANY_NAME@] uses and protects any information that you give [@CONFIG:COMPANY_NAME@] when you use this website. [@CONFIG:COMPANY_NAME@] is committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement. [@CONFIG:COMPANY_NAME@] may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
We may collect the following information:
For the exhaustive list of cookies we collect see the List of cookies we collect section.
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about web page traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website, by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us. You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
You may request details of personal information which we hold about you under the Data Protection Act 1998. A small fee will be payable. If you would like a copy of the information held on you please write to [@CONFIG:COMPANY_ADDR@].
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible, at the above address. We will promptly correct any information found to be incorrect.
The table below lists the cookies we collect and what information they store.
| COOKIE name | COOKIE Description |
|---|---|
| CART | The association with your shopping cart. |
| CATEGORY_INFO | Stores the category info on the page, that allows to display pages more quickly. |
| COMPARE | The items that you have in the Compare Products list. |
| CURRENCY | Your preferred currency |
| CUSTOMER | An encrypted version of your customer id with the store. |
| CUSTOMER_AUTH | An indicator if you are currently logged into the store. |
| CUSTOMER_INFO | An encrypted version of the customer group you belong to. |
| CUSTOMER_SEGMENT_IDS | Stores the Customer Segment ID |
| EXTERNAL_NO_CACHE | A flag, which indicates whether caching is disabled or not. |
| FRONTEND | You sesssion ID on the server. |
| GUEST-VIEW | Allows guests to edit their orders. |
| LAST_CATEGORY | The last category you visited. |
| LAST_PRODUCT | The most recent product you have viewed. |
| NEWMESSAGE | Indicates whether a new message has been received. |
| NO_CACHE | Indicates whether it is allowed to use cache. |
| PERSISTENT_SHOPPING_CART | A link to information about your cart and viewing history if you have asked the site. |
| POLL | The ID of any polls you have recently voted in. |
| POLLN | Information on what polls you have voted on. |
| RECENTLYCOMPARED | The items that you have recently compared. |
| STF | Information on products you have emailed to friends. |
| STORE | The store view or language you have selected. |
| USER_ALLOWED_SAVE_COOKIE | Indicates whether a customer allowed to use cookies. |
| VIEWED_PRODUCT_IDS | The products that you have recently viewed. |
| WISHLIST | An encrypted list of products added to your Wishlist. |
| WISHLIST_CNT | The number of items in your Wishlist. |
Products